Par problema sa Ubuntu 9.04

2

Par problema sa Ubuntu 9.04

offline
  • Ričard  Male
  • Lavlje srce
  • Supermoderator
  • Zver!
  • Electro maintenance engineer
  • Pridružio: 28 Nov 2006
  • Poruke: 13745
  • Gde živiš: Vršac

Napisano: 08 Maj 2009 18:26

Ako ce to ikako pomoci resenju problema evo i u default screen-u Wink

4307 frames in 5.0 seconds = 861.376 FPS
4641 frames in 5.0 seconds = 928.189 FPS
4482 frames in 5.0 seconds = 896.221 FPS
4474 frames in 5.0 seconds = 894.704 FPS
4441 frames in 5.0 seconds = 888.120 FPS
4471 frames in 5.0 seconds = 894.120 FPS
4462 frames in 5.0 seconds = 892.246 FPS
4472 frames in 5.0 seconds = 894.234 FPS
4451 frames in 5.0 seconds = 890.115 FPS
4639 frames in 5.0 seconds = 927.665 FPS
4550 frames in 5.0 seconds = 909.951 FPS
4378 frames in 5.0 seconds = 875.504 FPS
4263 frames in 5.0 seconds = 852.513 FPS
4435 frames in 5.0 seconds = 886.991 FPS
4464 frames in 5.0 seconds = 892.715 FPS
4460 frames in 5.0 seconds = 891.886 FPS
4477 frames in 5.0 seconds = 895.255 FPS
4476 frames in 5.0 seconds = 895.179 FPS
4476 frames in 5.0 seconds = 895.045 FPS
4452 frames in 5.0 seconds = 890.210 FPS
4458 frames in 5.0 seconds = 891.563 FPS
4497 frames in 5.0 seconds = 899.331 FPS
4460 frames in 5.0 seconds = 891.908 FPS
4481 frames in 5.0 seconds = 896.043 FPS
4489 frames in 5.0 seconds = 897.677 FPS
4594 frames in 5.0 seconds = 918.714 FPS
4557 frames in 5.0 seconds = 911.342 FPS
4464 frames in 5.0 seconds = 892.605 FPS
4480 frames in 5.0 seconds = 895.838 FPS
4551 frames in 5.0 seconds = 910.040 FPS
4276 frames in 5.0 seconds = 855.112 FPS


Zadnja tri podizanja su prosla ok, sto se tice rezolucije. Gasenje je jos uvek problem, mada se restart ponasa normalno.

Dopuna: 08 Maj 2009 18:31

Sa ovim mojom instalacijom definitivno nesto nije uredu, sad ne mogu da pristupim (Mount-ujem) ni jednom hard disku ni optickom uredjaju.



Registruj se da bi učestvovao u diskusiji. Registrovanim korisnicima se NE prikazuju reklame unutar poruka.
offline
  • Pridružio: 30 Dec 2007
  • Poruke: 4759
  • Gde živiš: Niš

izgleda da neće nešto ubuntu 9.04 sa ovim acerom Sad
dok je sa 8.10 išao lepo ? (mint 6 je baziran na 8.10 )

glxgears sad izgleda ok , nisam siguran koliko treba da bude za tu grafiku
(na phoronix forumu može da se nađe ,eventualno neki)


http://ubuntuforums.org/archive/index.php/t-1086102.html
http://ubuntuforums.org/archive/index.php/t-965678.html
pominju boot parametar rootdelay=90
(pre one dve crtice da se stavi --
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/290153

ili da obrišeš deo 'quiet splash' iz komandne linije ?

ili eventualno da li je neophodno baš 9.04 ,trenutno sa njim? Wink

da li možeš da prikačiš ispis komande dmesg ?

dmesg

i datoteku ,pošto podigneš desktop
/var/log/Xorg.0.log



offline
  • Ričard  Male
  • Lavlje srce
  • Supermoderator
  • Zver!
  • Electro maintenance engineer
  • Pridružio: 28 Nov 2006
  • Poruke: 13745
  • Gde živiš: Vršac

Obrisao sam "quiet splash" i dalje je isto stanje, nekad se lepo podigne, bude dobra i rezolucija i mogu da pristupim ostalim uredjajima, a nekad ne. Neki put jedno radi drugo ne Sad

Nije neophodan Ubuntu 9.04, svi ga hvale, pa rekoh; da ga probam. Zadovoljan sam i Mintom 6 i on super radi. Za sada nisam imao nikakvih problema, a nadam se i da ih nece biti Wink


Rezultat komande dmesg:
[   1.048099] Bluetooth: HCI socket layer initialized
[    1.048140] NET: Registered protocol family 8
[    1.048180] NET: Registered protocol family 20
[    1.048229] NetLabel: Initializing
[    1.048268] NetLabel:  domain hash size = 128
[    1.048307] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.048359] NetLabel:  unlabeled traffic allowed by default
[    1.048426] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    1.048581] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    1.052063] AppArmor: AppArmor Filesystem Enabled
[    1.056009] Switched to high resolution mode on CPU 0
[    1.057519] Switched to high resolution mode on CPU 1
[    1.064008] pnp: PnP ACPI init
[    1.064054] ACPI: bus type pnp registered
[    1.065112] pnp 00:04: io resource (0x2e-0x2f) overlaps 0000:09:00.0 BAR 2 (0x0-0x7f), disabling
[    1.065170] pnp 00:04: io resource (0x61-0x61) overlaps 0000:09:00.0 BAR 2 (0x0-0x7f), disabling
[    1.065227] pnp 00:04: io resource (0x63-0x63) overlaps 0000:09:00.0 BAR 2 (0x0-0x7f), disabling
[    1.065284] pnp 00:04: io resource (0x65-0x65) overlaps 0000:09:00.0 BAR 2 (0x0-0x7f), disabling
[    1.065341] pnp 00:04: io resource (0x67-0x67) overlaps 0000:09:00.0 BAR 2 (0x0-0x7f), disabling
[    1.065398] pnp 00:04: io resource (0x68-0x6f) overlaps 0000:09:00.0 BAR 2 (0x0-0x7f), disabling
[    1.065454] pnp 00:04: io resource (0x70-0x70) overlaps 0000:09:00.0 BAR 2 (0x0-0x7f), disabling
[    1.066708] pnp: PnP ACPI: found 10 devices
[    1.066749] ACPI: ACPI bus type pnp unregistered
[    1.066797] system 00:02: iomem range 0xfed00000-0xfed003ff has been reserved
[    1.066845] system 00:04: ioport range 0x680-0x69f has been reserved
[    1.066888] system 00:04: ioport range 0x480-0x48f has been reserved
[    1.066931] system 00:04: ioport range 0xffff-0xffff has been reserved
[    1.066975] system 00:04: ioport range 0xffff-0xffff has been reserved
[    1.067018] system 00:04: ioport range 0x1000-0x107f has been reserved
[    1.067061] system 00:04: ioport range 0x1180-0x11ff has been reserved
[    1.067104] system 00:04: ioport range 0x164e-0x164f has been reserved
[    1.067148] system 00:04: ioport range 0xfe00-0xfe00 has been reserved
[    1.067191] system 00:04: ioport range 0x400-0x47f has been reserved
[    1.067238] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    1.067282] system 00:09: iomem range 0xfed10000-0xfed13fff has been reserved
[    1.067327] system 00:09: iomem range 0xfed18000-0xfed18fff has been reserved
[    1.067371] system 00:09: iomem range 0xfed19000-0xfed19fff has been reserved
[    1.067415] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
[    1.067459] system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
[    1.067503] system 00:09: iomem range 0xfed40000-0xfed44fff has been reserved
[    1.067547] system 00:09: iomem range 0xfed45000-0xfed8ffff has been reserved
[    1.072279] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    1.072322] pci 0000:00:1c.0:   IO window: disabled
[    1.072365] pci 0000:00:1c.0:   MEM window: disabled
[    1.072407] pci 0000:00:1c.0:   PREFETCH window: disabled
[    1.072462] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:07
[    1.072504] pci 0000:00:1c.3:   IO window: disabled
[    1.072548] pci 0000:00:1c.3:   MEM window: 0xb8000000-0xb80fffff
[    1.072592] pci 0000:00:1c.3:   PREFETCH window: disabled
[    1.072647] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09
[    1.072690] pci 0000:00:1c.5:   IO window: 0x2000-0x2fff
[    1.072734] pci 0000:00:1c.5:   MEM window: 0xb8100000-0xb81fffff
[    1.072778] pci 0000:00:1c.5:   PREFETCH window: disabled
[    1.072823] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
[    1.072865] pci 0000:00:1e.0:   IO window: disabled
[    1.072908] pci 0000:00:1e.0:   MEM window: disabled
[    1.072950] pci 0000:00:1e.0:   PREFETCH window: disabled
[    1.073004] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.073050] pci 0000:00:1c.0: setting latency timer to 64
[    1.073057] pci 0000:00:1c.3: enabling device (0000 -> 0002)
[    1.073101] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.073147] pci 0000:00:1c.3: setting latency timer to 64
[    1.073153] pci 0000:00:1c.5: enabling device (0000 -> 0003)
[    1.073197] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    1.073243] pci 0000:00:1c.5: setting latency timer to 64
[    1.073249] pci 0000:00:1e.0: setting latency timer to 64
[    1.073252] bus: 00 index 0 io port: [0x00-0xffff]
[    1.073293] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[    1.073335] bus: 02 index 0 mmio: [0x0-0xfff]
[    1.073375] bus: 02 index 1 mmio: [0x0-0xfffff]
[    1.073415] bus: 02 index 2 mmio: [0x0-0xfffff]
[    1.073454] bus: 02 index 3 mmio: [0x0-0x0]
[    1.073494] bus: 07 index 0 mmio: [0x0-0xfff]
[    1.073533] bus: 07 index 1 mmio: [0xb8000000-0xb80fffff]
[    1.073575] bus: 07 index 2 mmio: [0x0-0xfffff]
[    1.073614] bus: 07 index 3 mmio: [0x0-0x0]
[    1.073654] bus: 09 index 0 io port: [0x2000-0x2fff]
[    1.073695] bus: 09 index 1 mmio: [0xb8100000-0xb81fffff]
[    1.073736] bus: 09 index 2 mmio: [0x0-0xfffff]
[    1.073775] bus: 09 index 3 mmio: [0x0-0x0]
[    1.073815] bus: 0a index 0 mmio: [0x0-0x0]
[    1.073854] bus: 0a index 1 mmio: [0x0-0x0]
[    1.073893] bus: 0a index 2 mmio: [0x0-0x0]
[    1.073932] bus: 0a index 3 io port: [0x00-0xffff]
[    1.073973] bus: 0a index 4 mmio: [0x000000-0xffffffffffffffff]
[    1.074021] NET: Registered protocol family 2
[    1.108053] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.108631] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    1.110615] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.111200] TCP: Hash tables configured (established 262144 bind 65536)
[    1.111244] TCP reno registered
[    1.120111] NET: Registered protocol family 1
[    1.120269] checking if image is initramfs... it is
[    1.791689] Freeing initrd memory: 7762k freed
[    1.795372] Simple Boot Flag at 0x36 set to 0x1
[    1.795739] audit: initializing netlink socket (disabled)
[    1.796416] type=2000 audit(1241817887.796:1): initialized
[    1.804763] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.805976] VFS: Disk quotas dquot_6.5.1
[    1.806065] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.806623] fuse init (API version 7.10)
[    1.806734] msgmni has been set to 7520
[    1.806921] alg: No test for stdrng (krng)
[    1.806969] io scheduler noop registered
[    1.807008] io scheduler anticipatory registered
[    1.807049] io scheduler deadline registered
[    1.807123] io scheduler cfq registered (default)
[    1.807173] pci 0000:00:02.0: Boot video device
[    1.809209] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    1.809243] pcieport-driver 0000:00:1c.0: found MSI capability
[    1.809312] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X
[    1.809323] pci_express 0000:00:1c.0:pcie00: allocate port service
[    1.809336] pci_express 0000:00:1c.0:pcie02: allocate port service
[    1.809347] pci_express 0000:00:1c.0:pcie03: allocate port service
[    1.809407] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[    1.809440] pcieport-driver 0000:00:1c.3: found MSI capability
[    1.809504] pcieport-driver 0000:00:1c.3: irq 2302 for MSI/MSI-X
[    1.809516] pci_express 0000:00:1c.3:pcie00: allocate port service
[    1.809527] pci_express 0000:00:1c.3:pcie02: allocate port service
[    1.809538] pci_express 0000:00:1c.3:pcie03: allocate port service
[    1.809591] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[    1.809624] pcieport-driver 0000:00:1c.5: found MSI capability
[    1.809688] pcieport-driver 0000:00:1c.5: irq 2301 for MSI/MSI-X
[    1.809699] pci_express 0000:00:1c.5:pcie00: allocate port service
[    1.809710] pci_express 0000:00:1c.5:pcie02: allocate port service
[    1.809720] pci_express 0000:00:1c.5:pcie03: allocate port service
[    1.809781] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.809916] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.810857] ACPI: AC Adapter [ACAD] (on-line)
[    1.810980] ACPI: Battery Slot [BAT1] (battery absent)
[    1.811089] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.811145] ACPI: Power Button (FF) [PWRF]
[    1.811222] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    1.811350] ACPI: Lid Switch [LID]
[    1.811429] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    1.811485] ACPI: Power Button (CM) [PWRB]
[    1.811562] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[    1.811619] ACPI: Sleep Button (CM) [SLPB]
[    1.812448] ACPI: SSDT B7B1AC20, 0265 (r1  PmRef  Cpu0Ist     3000 INTL 20061109)
[    1.813076] ACPI: SSDT B7B18620, 05B3 (r1  PmRef  Cpu0Cst     3001 INTL 20061109)
[    1.815698] Monitor-Mwait will be used to enter C-1 state
[    1.815700] Monitor-Mwait will be used to enter C-2 state
[    1.815702] Monitor-Mwait will be used to enter C-3 state
[    1.815715] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    1.815866] processor ACPI_CPU:00: registered as cooling_device0
[    1.815910] ACPI: Processor [CPU0] (supports 8 throttling states)
[    1.816488] ACPI: SSDT B7B19CA0, 01CF (r1  PmRef    ApIst     3000 INTL 20061109)
[    1.817036] ACPI: SSDT B7B19F20, 008D (r1  PmRef    ApCst     3000 INTL 20061109)
[    1.818232] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    1.818378] processor ACPI_CPU:01: registered as cooling_device1
[    1.818422] ACPI: Processor [CPU1] (supports 8 throttling states)
[    1.821551] thermal LNXTHERM:01: registered as thermal_zone0
[    1.824104] ACPI: Thermal Zone [THRM] (51 C)
[    1.861233] Linux agpgart interface v0.103
[    1.861279] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.862195] brd: module loaded
[    1.862513] loop: module loaded
[    1.862611] Fixed MDIO Bus: probed
[    1.862653] PPP generic driver version 2.4.2
[    1.862744] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    1.862822] Driver 'sd' needs updating - please use bus_type methods
[    1.862871] Driver 'sr' needs updating - please use bus_type methods
[    1.862948] ahci 0000:00:1f.2: version 3.0
[    1.862959] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.863032] ahci 0000:00:1f.2: irq 2300 for MSI/MSI-X
[    1.863103] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    1.863160] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part
[    1.863217] ahci 0000:00:1f.2: setting latency timer to 64
[    1.863480] scsi0 : ahci
[    1.863599] scsi1 : ahci
[    1.863686] scsi2 : ahci
[    1.863772] scsi3 : ahci
[    1.863859] scsi4 : ahci
[    1.863946] scsi5 : ahci
[    1.864090] ata1: SATA max UDMA/133 abar m2048@0xf0904000 port 0xf0904100 irq 2300
[    1.864146] ata2: SATA max UDMA/133 abar m2048@0xf0904000 port 0xf0904180 irq 2300
[    1.864201] ata3: DUMMY
[    1.864237] ata4: DUMMY
[    1.864275] ata5: SATA max UDMA/133 abar m2048@0xf0904000 port 0xf0904300 irq 2300
[    1.864330] ata6: SATA max UDMA/133 abar m2048@0xf0904000 port 0xf0904380 irq 2300
[    2.348015] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.748057] ACPI Warning (nspredef-0852): \_SB_.PCI0.SAT0.PRT0._GTF: Return type mismatch - found Integer, expected Buffer [20080926]
[    2.748167] ata1.00: _GTF unexpected object type 0x1
[    2.796247] ata1.00: ATA-8: WDC WD2500BEVT-22ZCT0, 11.01A11, max UDMA/133
[    2.796292] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    3.196055] ata1.00: _GTF unexpected object type 0x1
[    3.196195] ata1.00: configured for UDMA/133
[    4.084013] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.097411] ata2.00: ATAPI: Optiarc DVD RW AD-7560S, SX07, max UDMA/100, ATAPI AN
[    4.111822] ata2.00: configured for UDMA/100
[    4.432013] ata5: SATA link down (SStatus 0 SControl 300)
[    4.752012] ata6: SATA link down (SStatus 0 SControl 300)
[    4.752147] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BEVT-2 11.0 PQ: 0 ANSI: 5
[    4.752288] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[    4.752357] sd 0:0:0:0: [sda] Write Protect is off
[    4.752398] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.752423] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.752554] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[    4.752621] sd 0:0:0:0: [sda] Write Protect is off
[    4.752662] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.752685] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.752744]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
[    4.868528] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.868610] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.869735] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7560S  SX07 PQ: 0 ANSI: 5
[    4.875288] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.875344] Uniform CD-ROM driver Revision: 3.20
[    4.875462] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.875494] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    4.876094] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.876154] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    4.876212] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    4.876216] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    4.876314] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    4.880286] ehci_hcd 0000:00:1a.7: debug port 1
[    4.880330] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    4.880344] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf0904800
[    4.896008] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    4.896105] usb usb1: configuration #1 chosen from 1 choice
[    4.896172] hub 1-0:1.0: USB hub found
[    4.896215] hub 1-0:1.0: 6 ports detected
[    4.896350] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    4.896401] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    4.896404] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    4.896480] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    4.900428] ehci_hcd 0000:00:1d.7: debug port 1
[    4.900472] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    4.900483] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0904c00
[    4.912008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    4.912106] usb usb2: configuration #1 chosen from 1 choice
[    4.912167] hub 2-0:1.0: USB hub found
[    4.912211] hub 2-0:1.0: 6 ports detected
[    4.912331] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.912385] uhci_hcd: USB Universal Host Controller Interface driver
[    4.912446] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.912494] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    4.912497] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    4.912582] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    4.912664] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[    4.912771] usb usb3: configuration #1 chosen from 1 choice
[    4.912832] hub 3-0:1.0: USB hub found
[    4.912876] hub 3-0:1.0: 2 ports detected
[    4.912988] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    4.913040] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    4.913043] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    4.913123] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    4.913203] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[    4.913313] usb usb4: configuration #1 chosen from 1 choice
[    4.913376] hub 4-0:1.0: USB hub found
[    4.913420] hub 4-0:1.0: 2 ports detected
[    4.913529] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    4.913576] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    4.913579] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    4.913653] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    4.913727] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
[    4.913832] usb usb5: configuration #1 chosen from 1 choice
[    4.913893] hub 5-0:1.0: USB hub found
[    4.913936] hub 5-0:1.0: 2 ports detected
[    4.914049] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    4.914097] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    4.914100] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    4.914178] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    4.914252] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[    4.914358] usb usb6: configuration #1 chosen from 1 choice
[    4.914419] hub 6-0:1.0: USB hub found
[    4.914461] hub 6-0:1.0: 2 ports detected
[    4.914575] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    4.914622] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    4.914625] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    4.914703] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    4.914776] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[    4.914879] usb usb7: configuration #1 chosen from 1 choice
[    4.914943] hub 7-0:1.0: USB hub found
[    4.914986] hub 7-0:1.0: 2 ports detected
[    4.915095] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    4.915145] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    4.915148] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    4.915228] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    4.915308] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[    4.916025] usb usb8: configuration #1 chosen from 1 choice
[    4.916089] hub 8-0:1.0: USB hub found
[    4.916134] hub 8-0:1.0: 2 ports detected
[    4.916286] usbcore: registered new interface driver libusual
[    4.916356] usbcore: registered new interface driver usbserial
[    4.916406] USB Serial support registered for generic
[    4.916460] usbcore: registered new interface driver usbserial_generic
[    4.916503] usbserial: USB Serial Driver core
[    4.916585] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    4.918841] i8042.c: Detected active multiplexing controller, rev 1.1.
[    4.921312] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.921358] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    4.921403] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    4.921447] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    4.921491] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    4.932034] mice: PS/2 mouse device common for all mice
[    4.992055] rtc_cmos 00:05: RTC can wake from S4
[    4.992131] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    4.992197] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    4.992290] device-mapper: uevent: version 1.0.3
[    4.992414] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    4.992532] device-mapper: multipath: version 1.0.5 loaded
[    4.992576] device-mapper: multipath round-robin: version 1.0.0 loaded
[    4.992758] cpuidle: using governor ladder
[    4.992895] cpuidle: using governor menu
[    4.993306] TCP cubic registered
[    4.993405] NET: Registered protocol family 10
[    4.993798] lo: Disabled Privacy Extensions
[    4.994102] NET: Registered protocol family 17
[    4.994158] Bluetooth: L2CAP ver 2.11
[    4.994199] Bluetooth: L2CAP socket layer initialized
[    4.994242] Bluetooth: SCO (Voice Link) ver 0.6
[    4.994283] Bluetooth: SCO socket layer initialized
[    4.994350] Bluetooth: RFCOMM socket layer initialized
[    4.994354] Marking TSC unstable due to TSC halts in idle
[    4.994444] Bluetooth: RFCOMM TTY layer initialized
[    4.994486] Bluetooth: RFCOMM ver 1.10
[    4.995331] registered taskstats version 1
[    4.995476]   Magic number: 9:197:449
[    4.995613] rtc_cmos 00:05: setting system clock to 2009-05-08 21:24:51 UTC (1241817891)
[    4.995670] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    4.995712] EDD information not available.
[    4.995808] Freeing unused kernel memory: 536k freed
[    4.996052] Write protecting the kernel read-only data: 6708k
[    5.020260] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    5.181216] ATL1E 0000:09:00.0: enabling device (0000 -> 0003)
[    5.181270] ATL1E 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    5.181326] ATL1E 0000:09:00.0: setting latency timer to 64
[    5.209031] usb 1-2: new high speed USB device using ehci_hcd and address 2
[    5.352258] usb 1-2: configuration #1 chosen from 1 choice
[    5.357517] Initializing USB Mass Storage driver...
[    5.358990] scsi6 : SCSI emulation for USB Mass Storage devices
[    5.360460] usb-storage: device found at 2
[    5.360462] usb-storage: waiting for device to settle before scanning
[    5.360469] usbcore: registered new interface driver usb-storage
[    5.360516] USB Mass Storage support registered.
[    5.468068] usb 1-6: new high speed USB device using ehci_hcd and address 3
[    5.640641] usb 1-6: configuration #1 chosen from 1 choice
[    5.752071] usb 2-6: new high speed USB device using ehci_hcd and address 2
[    5.860506] PM: Starting manual resume from disk
[    5.860548] PM: Resume from partition 8:9
[    5.860550] PM: Checking hibernation image.
[    5.860760] PM: Resume from disk failed.
[    5.885929] usb 2-6: configuration #1 chosen from 1 choice
[    5.886666] scsi7 : SCSI emulation for USB Mass Storage devices
[    5.887089] usb-storage: device found at 2
[    5.887091] usb-storage: waiting for device to settle before scanning
[    5.897301] kjournald starting.  Commit interval 5 seconds
[    5.897375] EXT3-fs: mounted filesystem with ordered data mode.
[    6.001047] Clocksource tsc unstable (delta = -141986439 ns)
[   10.360442] usb-storage: device scan complete
[   10.362497] scsi 6:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[   10.364851] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   10.365024] sd 6:0:0:0: Attached scsi generic sg2 type 0
[   10.884575] usb-storage: device scan complete
[   10.888133] scsi 7:0:0:0: Direct-Access     SAMSUNG  HM160JC          0811 PQ: 0 ANSI: 0
[   10.889368] sd 7:0:0:0: [sdc] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[   10.890744] sd 7:0:0:0: [sdc] Test WP failed, assume Write Enabled
[   10.890793] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[   10.891739] sd 7:0:0:0: [sdc] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[   10.893117] sd 7:0:0:0: [sdc] Test WP failed, assume Write Enabled
[   10.893165] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[   10.893213]  sdc: sdc1 < sdc5 >
[   10.897649] sd 7:0:0:0: [sdc] Attached SCSI disk
[   10.897730] sd 7:0:0:0: Attached scsi generic sg3 type 0
[   13.691227] udev: starting version 141
[   13.802673] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[   13.803412] agpgart-intel 0000:00:00.0: detected 131068K stolen memory
[   13.805867] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[   13.873870] iTCO_vendor_support: vendor-support=0
[   13.875358] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[   13.875549] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[   13.875672] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   13.891261] acpi device:05: registered as cooling_device2
[   13.891544] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input6
[   13.912197] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   13.921521] cfg80211: Calling CRDA to update world regulatory domain
[   13.929115] Linux video capture interface: v2.00
[   14.156404] cfg80211: World regulatory domain updated:
[   14.156450]    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   14.156505]    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.156549]    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.156593]    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.156641]    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.156689]    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.220689] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:a103)
[   14.222302] input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input7
[   14.235675] acer-wmi: Acer Laptop ACPI-WMI Extras
[   14.236264] acer-wmi: Brightness must be controlled by generic video driver
[   14.236406] acer-wmi: software RFKILL enabled
[   14.240125] usbcore: registered new interface driver uvcvideo
[   14.240177] USB Video Class driver (v0.1.0)
[   14.265557] input: PC Speaker as /devices/platform/pcspkr/input/input8
[   14.388942] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[   14.389016] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[   14.389160] iwlagn 0000:07:00.0: enabling device (0000 -> 0002)
[   14.389212] iwlagn 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   14.389267] iwlagn 0000:07:00.0: setting latency timer to 64
[   14.389331] iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[   14.411214] iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
[   14.411324] iwlagn 0000:07:00.0: irq 2299 for MSI/MSI-X
[   14.414085] phy0: Selected rate control algorithm 'iwl-agn-rs'
[   14.416766] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[   14.876735] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   14.876860] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   15.296447] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x12a0b1, caps: 0xa04711/0xa04000
[   15.331237] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[   16.351953] lp: driver loaded but no devices found
[   16.418631] Adding 497972k swap on /dev/sda9.  Priority:-1 extents:1 across:497972k
[   16.747257] EXT3 FS on sda8, internal journal
[   17.294490] type=1505 audit(1241810703.797:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=3382
[   17.334207] type=1505 audit(1241810703.837:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=3398
[   17.334310] type=1505 audit(1241810703.837:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=3398
[   17.334346] type=1505 audit(1241810703.837:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=3398
[   17.334382] type=1505 audit(1241810703.837:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=3398
[   17.446426] type=1505 audit(1241810703.949:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=3408
[   17.446576] type=1505 audit(1241810703.949:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=3408
[   17.472804] type=1505 audit(1241810703.973:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=3440
[   19.907015] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   19.907018] Bluetooth: BNEP filters: protocol multicast
[   19.927201] Bridge firewalling registered
[   20.672945] ppdev: user-space parallel port driver
[   22.933793] [drm] Initialized drm 1.1.0 20060810
[   22.938680] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   22.938685] pci 0000:00:02.0: setting latency timer to 64
[   22.938955] pci 0000:00:02.0: irq 2298 for MSI/MSI-X
[   22.939055] [drm] Initialized i915 1.6.0 20080730 on minor 0
[   22.940273] [drm:i915_setparam] *ERROR* unknown parameter 4
[   24.495955] ATL1E 0000:09:00.0: irq 2297 for MSI/MSI-X
[   24.496772] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   24.497490] iwlagn 0000:07:00.0: firmware: requesting iwlwifi-5000-1.ucode
[   24.498275] ATL1E 0000:09:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[   24.743701] Registered led device: iwl-phy0:radio
[   24.743727] Registered led device: iwl-phy0:assoc
[   24.743753] Registered led device: iwl-phy0:RX
[   24.743777] Registered led device: iwl-phy0:TX
[   24.766837] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   24.778326] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   35.613015] eth0: no IPv6 routers present
[   62.970842] [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
[   62.975675] mtrr: no MTRR for d0000000,10000000 found
[   65.712389] [drm:i915_setparam] *ERROR* unknown parameter 4
ricard@acer-6930:~$


/var/log/Xorg.0.log
https://www.mycity.rs/must-login.png

A posto postoji i Xorg.o.log.old evo i njega
https://www.mycity.rs/must-login.png

offline
  • pixxel  Male
  • Legendarni građanin
  • Pridružio: 21 Jun 2005
  • Poruke: 9091
  • Gde živiš: Tu i tamo...

Prvo mi reci je li cisti install ili upgrade sa starije?
Nakon toga, postavi izlaz ove komande:

lspci -nn | grep VGA

I postavi nam /etc/X11/xorg.conf

offline
  • Ričard  Male
  • Lavlje srce
  • Supermoderator
  • Zver!
  • Electro maintenance engineer
  • Pridružio: 28 Nov 2006
  • Poruke: 13745
  • Gde živiš: Vršac

Cist instal, prekjuce sam instalirao.

lspci -nn | grep VGA
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07)

/etc/X11/xorg.conf
https://www.mycity.rs/must-login.png

Ne znam da li nesto znaci ali pored xorg.conf postoje cetiri xorg.conf fajla:

offline
  • Pridružio: 05 Feb 2009
  • Poruke: 171

To su stari xorgovi. Koristis taj cist xorg

wiki.ubuntu.com/ReinhardTartler/X/RevertingIntelDriverTo2.4

offline
  • pixxel  Male
  • Legendarni građanin
  • Pridružio: 21 Jun 2005
  • Poruke: 9091
  • Gde živiš: Tu i tamo...

Na ovom sajtu sto je dao crowbgd za tvoju graficku kaze da je lik kucao komandu sudo xrandr --fbmm da bi sredio rezoluciju. Nista te ne kosta da probas.

Ako ti to ne uspe, kucaj sudo gedit /etc/X11/xorg.conf
i izbaci ovaj deo iz fajla:
SubSection "Display"
      Virtual   2384 768
   EndSubSection

offline
  • Ričard  Male
  • Lavlje srce
  • Supermoderator
  • Zver!
  • Electro maintenance engineer
  • Pridružio: 28 Nov 2006
  • Poruke: 13745
  • Gde živiš: Vršac

Napisano: 09 Maj 2009 1:47

Ma grafika je trenutno najmanji problem.

Probao sam ovo sto je crowbgd postovao, videcu sta se desava nakon restarta. Ako je isto probacu i sa tvojim predlogom. Grafiku sad resavam, ako je losa, tako sto se izlogujem, pa opet ulogujem i bude ok.

Mnogo veci problem je sto ne mogu da mountujem particije i sto imam problem sa gasenjem.

No u svakom slucaju hvala svima na pomoci, ostavicu par dana Ubuntu pa se vracam na Mint 6, on radi ok.

Dopuna: 09 Maj 2009 1:59

Ne pomaze ni jedno resenje. Snimio sam monitor pri gasenju, vrlo cudna pojava. Sutra cu negde okaciti pa postovati da vidte.

Dopuna: 09 Maj 2009 2:08

offline
  • Pridružio: 05 Feb 2009
  • Poruke: 171

Taj problem sa gasenjem sam ja imao sa Kubuntuom koji sam pokusavao iz inata da instaliram bas zbog problema sa grafikom i drajverima. Naime,Ubuntu koji mi je defolt OS radi sa driverima za Nvidiu , Kubuntu sa tim istim ne da ne radi nego nema blage veze. Pri samoj instalaciji bguje,ako se instalira dobije crn ekran, kada nema crnog ekrana onda sutdown ili restart su san. Ne budem lenjj i instaliram juce Kubuntu 5 puta za redom,i gle cuda Kubuntu cedo kubuntasa proradi sa istim drajverima sa kijoma se krasirao 10 puta. Ne znam zaasto,ali to mu je to. Vrlo je moguce da drajveri za grafiku prave problem. A sta je sa praticijama?

offline
  • pixxel  Male
  • Legendarni građanin
  • Pridružio: 21 Jun 2005
  • Poruke: 9091
  • Gde živiš: Tu i tamo...

Ako probavas da mountujes windows particicje, i ne moze, idi prvo u windows i odradi checkdisk na svakoj od njih, pa se vrati u linux - ako nisu dobro unmountovane u windowsu, nema sanse da ih mountujes u linuxu.

probaj ovo:
sudo apt-get install ntfs-config
i posle toga otidji u System/Administration/NTFS Config Tool
i tu podesi da mountuje particije pri bootu, i restartuj komp.

Ko je trenutno na forumu
 

Ukupno su 996 korisnika na forumu :: 38 registrovanih, 8 sakrivenih i 950 gosta   ::   [ Administrator ] [ Supermoderator ] [ Moderator ] :: Detaljnije

Najviše korisnika na forumu ikad bilo je 3466 - dana 01 Jun 2021 17:07

Korisnici koji su trenutno na forumu:
Korisnici trenutno na forumu: 5.56, _Sale, Bluper, bobomicek, branko7, bufanje, cavatina, cenejac111, Dannyboy, darkojbn, djboj, DPera, DragoslavS, Frunze, HrcAk47, Karla, Kibice, Koja79, krkalon, kunktator, Litostroton, mackenzie, Markovic, mikrimaus, MiroslavD, nenad81, nikoladim, Panter, royst33, Udvar, uruk, vathra, Viktor Petrenko, Vlada1389, vladulns, Volkhov-M, |_MeD_|, Žrnov