Problem sa rezolucijom

2

Problem sa rezolucijom

offline
  • Pridružio: 30 Mar 2012
  • Poruke: 65

Imao sam slican problem,samo sto je meni bila rezolucija 640x800,a trebala mi je 1024x768.Problem sam resio tako sto sam usao u Grub nakon paljenja racunara i tamo gde pise linux 2.6.27-9-generic(mozda su kod Vas drugi brojevi) pritisnuo E na tastaturi.Zatim kad mi je izbacio onaj text,u delu gde pise RO QUIET SPLASH nomodeset(nomodeset sam izbrisao) i napisao i915.modeset=0.Nakon ovoga sam dobio rezoluciju koja mi je trebala.



Registruj se da bi učestvovao u diskusiji. Registrovanim korisnicima se NE prikazuju reklame unutar poruka.
offline
  • Brok  Male
  • Moderator foruma
  • Mihajlo Bogdanović
  • Linux driver - fighter - warrior
  • Pridružio: 04 Maj 2005
  • Poruke: 3259

Pedja, pre nego kreneš sa uputstvom koje je postavio Dekao, probaj ovo.
Upiši u GRUB meni nomodeset.

Ukratko kako to da probaš.
Kada se učita GRUB idi na tipku e na tastaturi, pri tome će ti se otvoriti ovakav prozor, i samo dodaj na kraju kao i na donjem prikazu nomodeset (jeste različita verzija kernela na prikazu od tvog ali to nemoj da te brine).


Potom pošto si upisao nomodeset idi na kobinaciju tipki Ctrl i x pa vidi šta će se dogoditi.

Dodatak
AOHO, pisali smo u isto vreme ili nisam video tvoj post, pošto je na drugoj stranici teme. Nema veze neka i ovog posta, neće smetati. Wink



offline
  • Srđan Tot
  • Am I evil? I am man, yes I am.
  • Pridružio: 12 Jul 2005
  • Poruke: 2483
  • Gde živiš: Ljubljana

pedja93 ::@ Srki_82

Desilo se isto kao i sa "xorg.conf", vjerovatno nemam taj fajl.

To nije fajl, to je direktorijum Smile Treba mi izlaz komande:
ls -la /etc/X11/xorg.conf.d/

offline
  • Pridružio: 02 Sep 2008
  • Poruke: 4094
  • Gde živiš: Bg

Xorg koristi xorg.conf kao konfiguracijski fajl koji je smešten u direktorijumu xorg.conf.d Smile

Mislim da xorg.conf ne dolazi više po defaultu i da se mora manuelno kreirati.

offline
  • Pridružio: 10 Jun 2009
  • Poruke: 1203

@brok

Pritiskom na taster "E" se nista ne desava. Ne znam da li ima neke veze zato sto mi je Ubuntu jedini OS na racunaru i ne prikazuje mi grub kako ga je inace prikazivao kad sam imao vise sistema na racunaru.


@ Srki_82

Evo izlaza

pedja@hp:~$ ls -la /etc/X11/xorg.conf.d/
ls: cannot access /etc/X11/xorg.conf.d/: No such file or directory

offline
  • Srđan Tot
  • Am I evil? I am man, yes I am.
  • Pridružio: 12 Jul 2005
  • Poruke: 2483
  • Gde živiš: Ljubljana

Super, bar smo sigurni da nema nekih X podešavanja koje bi zeznula rezoluciju.
Ako ti uputstva koja su dali Dekao i Brok ne pomognu, da izlaz sledeće komande:
cat /var/log/Xorg.0.log

offline
  • Pridružio: 10 Jun 2009
  • Poruke: 1203

Evo izlaza

pedja@hp:~$ cat /var/log/Xorg.0.log
[    14.876]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[    14.876] X Protocol Version 11, Revision 0
[    14.876] Build Operating System: Linux 2.6.42-37-generic i686 Ubuntu
[    14.876] Current Operating System: Linux hp 3.5.0-27-generic #46~precise1-Ubuntu SMP Tue Mar 26 19:33:56 UTC 2013 i686
[    14.876] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-27-generic root=UUID=6688ad2a-b90f-4e68-a018-9b7c5e2171ef ro quiet splash vt.handoff=7
[    14.876] Build Date: 11 April 2013  11:50:36PM
[    14.876] xorg-server 2:1.13.0-0ubuntu6.1~precise3 (For technical support please see http://www.ubuntu.com/support)
[    14.876] Current version of pixman: 0.24.4
[    14.876]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[    14.876] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    14.877] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 24 17:47:29 2013
[    14.896] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    14.896] (==) No Layout section.  Using the first Screen section.
[    14.896] (==) No screen section available. Using defaults.
[    14.896] (**) |-->Screen "Default Screen Section" (0)
[    14.897] (**) |   |-->Monitor "<default monitor>"
[    14.897] (==) No monitor specified for screen "Default Screen Section".
   Using a default monitor configuration.
[    14.897] (==) Automatically adding devices
[    14.897] (==) Automatically enabling devices
[    14.897] (==) Automatically adding GPU devices
[    14.897] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    14.897]    Entry deleted from font path.
[    14.897] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    14.897]    Entry deleted from font path.
[    14.897] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    14.897]    Entry deleted from font path.
[    14.897] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    14.897]    Entry deleted from font path.
[    14.897] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    14.897]    Entry deleted from font path.
[    14.897] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    14.897]    Entry deleted from font path.
[    14.897] (==) FontPath set to:
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/Type1,
   built-ins
[    14.897] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    14.897] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[    14.897] (II) Loader magic: 0xb7747620
[    14.897] (II) Module ABI versions:
[    14.897]    X.Org ANSI C Emulation: 0.4
[    14.897]    X.Org Video Driver: 13.0
[    14.897]    X.Org XInput driver : 18.0
[    14.897]    X.Org Server Extension : 7.0
[    14.898] (II) config/udev: Adding drm device (/dev/dri/card0)
[    14.899] (--) PCI:*(0:0:2:0) 8086:2992:103c:2802 rev 2, Mem @ 0xf0400000/1048576, 0xe0000000/268435456, I/O @ 0x00001100/8
[    14.899] (II) Open ACPI successful (/var/run/acpid.socket)
[    14.900] Initializing built-in extension Generic Event Extension
[    14.900] Initializing built-in extension SHAPE
[    14.900] Initializing built-in extension MIT-SHM
[    14.900] Initializing built-in extension XInputExtension
[    14.900] Initializing built-in extension XTEST
[    14.900] Initializing built-in extension BIG-REQUESTS
[    14.900] Initializing built-in extension SYNC
[    14.900] Initializing built-in extension XKEYBOARD
[    14.900] Initializing built-in extension XC-MISC
[    14.900] Initializing built-in extension SECURITY
[    14.900] Initializing built-in extension XINERAMA
[    14.900] Initializing built-in extension XFIXES
[    14.900] Initializing built-in extension RENDER
[    14.900] Initializing built-in extension RANDR
[    14.900] Initializing built-in extension COMPOSITE
[    14.900] Initializing built-in extension DAMAGE
[    14.900] Initializing built-in extension MIT-SCREEN-SAVER
[    14.900] Initializing built-in extension DOUBLE-BUFFER
[    14.900] Initializing built-in extension RECORD
[    14.900] Initializing built-in extension DPMS
[    14.900] Initializing built-in extension X-Resource
[    14.900] Initializing built-in extension XVideo
[    14.900] Initializing built-in extension XVideo-MotionCompensation
[    14.900] Initializing built-in extension XFree86-VidModeExtension
[    14.900] Initializing built-in extension XFree86-DGA
[    14.900] Initializing built-in extension XFree86-DRI
[    14.900] Initializing built-in extension DRI2
[    14.900] (II) LoadModule: "glx"
[    14.919] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    14.919] (II) Module glx: vendor="X.Org Foundation"
[    14.919]    compiled for 1.13.0, module version = 1.0.0
[    14.919]    ABI class: X.Org Server Extension, version 7.0
[    14.919] (==) AIGLX enabled
[    14.919] Loading extension GLX
[    14.919] (==) Matched intel as autoconfigured driver 0
[    14.919] (==) Matched intel as autoconfigured driver 1
[    14.919] (==) Matched vesa as autoconfigured driver 2
[    14.919] (==) Matched modesetting as autoconfigured driver 3
[    14.919] (==) Matched fbdev as autoconfigured driver 4
[    14.919] (==) Assigned the driver to the xf86ConfigLayout
[    14.920] (II) LoadModule: "intel"
[    14.920] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    14.920] (II) Module intel: vendor="X.Org Foundation"
[    14.920]    compiled for 1.13.0, module version = 2.20.9
[    14.920]    Module class: X.Org Video Driver
[    14.920]    ABI class: X.Org Video Driver, version 13.0
[    14.920] (II) LoadModule: "vesa"
[    14.921] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    14.921] (II) Module vesa: vendor="X.Org Foundation"
[    14.921]    compiled for 1.13.0, module version = 2.3.2
[    14.921]    Module class: X.Org Video Driver
[    14.921]    ABI class: X.Org Video Driver, version 13.0
[    14.921] (II) LoadModule: "modesetting"
[    14.921] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    14.921] (II) Module modesetting: vendor="X.Org Foundation"
[    14.921]    compiled for 1.13.0, module version = 0.5.0
[    14.921]    Module class: X.Org Video Driver
[    14.921]    ABI class: X.Org Video Driver, version 13.0
[    14.921] (II) LoadModule: "fbdev"
[    14.921] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    14.922] (II) Module fbdev: vendor="X.Org Foundation"
[    14.922]    compiled for 1.13.0, module version = 0.4.3
[    14.922]    Module class: X.Org Video Driver
[    14.922]    ABI class: X.Org Video Driver, version 13.0
[    14.922] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
   i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
   E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
   965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
   4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
   Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
   Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
   Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
   Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
   Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
   Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
   Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
   Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
   Haswell Server (GT2+), Haswell SDV Desktop (GT1),
   Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
   Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
   Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
   Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
   Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
   Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
   Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
   Haswell ULT Server (GT1), Haswell ULT Server (GT2),
   Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
   Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
   Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
   Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
   Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
   ValleyView PO board
[    14.923] (II) VESA: driver for VESA chipsets: vesa
[    14.923] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    14.923] (II) FBDEV: driver for framebuffer: fbdev
[    14.923] (++) using VT number 7

[    14.923] (II) intel(0): using device path '/dev/dri/card0'
[    14.923] (WW) Falling back to old probe method for vesa
[    14.923] (WW) Falling back to old probe method for modesetting
[    14.923] (WW) Falling back to old probe method for fbdev
[    14.923] (II) Loading sub module "fbdevhw"
[    14.923] (II) LoadModule: "fbdevhw"
[    14.923] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    14.923] (II) Module fbdevhw: vendor="X.Org Foundation"
[    14.923]    compiled for 1.13.0, module version = 0.0.2
[    14.923]    ABI class: X.Org Video Driver, version 13.0
[    14.924] (II) intel(0): Creating default Display subsection in Screen section
   "Default Screen Section" for depth/fbbpp 24/32
[    14.924] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    14.924] (==) intel(0): RGB weight 888
[    14.924] (==) intel(0): Default visual is TrueColor
[    14.924] (--) intel(0): Integrated Graphics Chipset: Intel(R) 965Q
[    14.924] (**) intel(0): Relaxed fencing enabled
[    14.924] (**) intel(0): Wait on SwapBuffers? enabled
[    14.924] (**) intel(0): Triple buffering? enabled
[    14.924] (**) intel(0): Framebuffer tiled
[    14.924] (**) intel(0): Pixmaps tiled
[    14.924] (**) intel(0): 3D buffers tiled
[    14.924] (**) intel(0): SwapBuffers wait enabled
[    14.924] (==) intel(0): video overlay key set to 0x101fe
[    14.940] (II) intel(0): Output VGA1 has no monitor section
[    14.956] (II) intel(0): EDID for output VGA1
[    14.956] (II) intel(0): Printing probed modes for output VGA1
[    14.956] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    14.956] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    14.956] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    14.956] (II) intel(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    14.956] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 489 492 525 -hsync -vsync (31.5 kHz e)
[    14.956] (II) intel(0): Output VGA1 connected
[    14.956] (II) intel(0): Using exact sizes for initial modes
[    14.956] (II) intel(0): Output VGA1 using initial mode 1024x768
[    14.956] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    14.956] (II) intel(0): Kernel page flipping support detected, enabling
[    14.956] (==) intel(0): DPI set to (96, 96)
[    14.956] (II) Loading sub module "fb"
[    14.956] (II) LoadModule: "fb"
[    14.957] (II) Loading /usr/lib/xorg/modules/libfb.so
[    14.957] (II) Module fb: vendor="X.Org Foundation"
[    14.957]    compiled for 1.13.0, module version = 1.0.0
[    14.957]    ABI class: X.Org ANSI C Emulation, version 0.4
[    14.957] (II) Loading sub module "dri2"
[    14.957] (II) LoadModule: "dri2"
[    14.957] (II) Module "dri2" already built-in
[    14.957] (II) UnloadModule: "vesa"
[    14.957] (II) Unloading vesa
[    14.957] (II) UnloadModule: "modesetting"
[    14.957] (II) Unloading modesetting
[    14.957] (II) UnloadModule: "fbdev"
[    14.957] (II) Unloading fbdev
[    14.957] (II) UnloadSubModule: "fbdevhw"
[    14.957] (II) Unloading fbdevhw
[    14.957] (==) Depth 24 pixmap format is 32 bpp
[    14.957] (II) intel(0): [DRI2] Setup complete
[    14.957] (II) intel(0): [DRI2]   DRI driver: i965
[    14.957] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[    14.970] (II) UXA(0): Driver registered support for the following operations:
[    14.971] (II)         solid
[    14.971] (II)         copy
[    14.971] (II)         composite (RENDER acceleration)
[    14.971] (II)         put_image
[    14.971] (II)         get_image
[    14.971] (==) intel(0): Backing store disabled
[    14.971] (==) intel(0): Silken mouse enabled
[    14.971] (II) intel(0): Initializing HW Cursor
[    14.971] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    14.971] (==) intel(0): DPMS enabled
[    14.971] (==) intel(0): Intel XvMC decoder enabled
[    14.971] (II) intel(0): Set up textured video
[    14.971] (II) intel(0): Set up overlay video
[    14.971] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[    14.971] (II) intel(0): direct rendering: DRI2 Enabled
[    14.971] (==) intel(0): hotplug detection: "enabled"
[    14.988] (--) RandR disabled
[    15.003] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    15.003] (II) AIGLX: enabled GLX_INTEL_swap_event
[    15.003] (II) AIGLX: enabled GLX_ARB_create_context
[    15.003] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    15.003] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    15.003] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    15.003] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    15.003] (II) AIGLX: Loaded and initialized i965
[    15.003] (II) GLX: Initialized DRI2 GL provider for screen 0
[    15.004] (II) intel(0): Setting screen physical size to 270 x 203
[    15.015] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    15.019] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    15.019] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    15.019] (II) LoadModule: "evdev"
[    15.019] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    15.020] (II) Module evdev: vendor="X.Org Foundation"
[    15.020]    compiled for 1.13.0, module version = 2.7.3
[    15.020]    Module class: X.Org XInput Driver
[    15.020]    ABI class: X.Org XInput driver, version 18.0
[    15.020] (II) Using input driver 'evdev' for 'Power Button'
[    15.020] (**) Power Button: always reports core events
[    15.020] (**) evdev: Power Button: Device: "/dev/input/event1"
[    15.020] (--) evdev: Power Button: Vendor 0 Product 0x1
[    15.020] (--) evdev: Power Button: Found keys
[    15.020] (II) evdev: Power Button: Configuring as keyboard
[    15.020] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    15.020] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    15.020] (**) Option "xkb_rules" "evdev"
[    15.020] (**) Option "xkb_model" "pc105"
[    15.020] (**) Option "xkb_layout" "us"
[    15.021] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    15.021] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    15.021] (II) Using input driver 'evdev' for 'Video Bus'
[    15.021] (**) Video Bus: always reports core events
[    15.021] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    15.021] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    15.021] (--) evdev: Video Bus: Found keys
[    15.021] (II) evdev: Video Bus: Configuring as keyboard
[    15.021] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5"
[    15.021] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    15.021] (**) Option "xkb_rules" "evdev"
[    15.021] (**) Option "xkb_model" "pc105"
[    15.021] (**) Option "xkb_layout" "us"
[    15.022] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    15.022] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    15.022] (II) Using input driver 'evdev' for 'Power Button'
[    15.022] (**) Power Button: always reports core events
[    15.022] (**) evdev: Power Button: Device: "/dev/input/event0"
[    15.022] (--) evdev: Power Button: Vendor 0 Product 0x1
[    15.022] (--) evdev: Power Button: Found keys
[    15.022] (II) evdev: Power Button: Configuring as keyboard
[    15.022] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    15.022] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    15.022] (**) Option "xkb_rules" "evdev"
[    15.022] (**) Option "xkb_model" "pc105"
[    15.022] (**) Option "xkb_layout" "us"
[    15.023] (II) config/udev: Adding drm device (/dev/dri/card0)
[    15.024] (II) config/udev: Adding input device Dell Dell USB Keyboard Hub (/dev/input/event3)
[    15.024] (**) Dell Dell USB Keyboard Hub: Applying InputClass "evdev keyboard catchall"
[    15.024] (II) Using input driver 'evdev' for 'Dell Dell USB Keyboard Hub'
[    15.024] (**) Dell Dell USB Keyboard Hub: always reports core events
[    15.024] (**) evdev: Dell Dell USB Keyboard Hub: Device: "/dev/input/event3"
[    15.024] (--) evdev: Dell Dell USB Keyboard Hub: Vendor 0x413c Product 0x2002
[    15.024] (--) evdev: Dell Dell USB Keyboard Hub: Found keys
[    15.024] (II) evdev: Dell Dell USB Keyboard Hub: Configuring as keyboard
[    15.024] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input3/event3"
[    15.024] (II) XINPUT: Adding extended input device "Dell Dell USB Keyboard Hub" (type: KEYBOARD, id 9)
[    15.024] (**) Option "xkb_rules" "evdev"
[    15.024] (**) Option "xkb_model" "pc105"
[    15.024] (**) Option "xkb_layout" "us"
[    15.025] (II) config/udev: Adding input device Dell Dell USB Keyboard Hub (/dev/input/event4)
[    15.025] (**) Dell Dell USB Keyboard Hub: Applying InputClass "evdev keyboard catchall"
[    15.025] (II) Using input driver 'evdev' for 'Dell Dell USB Keyboard Hub'
[    15.025] (**) Dell Dell USB Keyboard Hub: always reports core events
[    15.025] (**) evdev: Dell Dell USB Keyboard Hub: Device: "/dev/input/event4"
[    15.025] (--) evdev: Dell Dell USB Keyboard Hub: Vendor 0x413c Product 0x2002
[    15.025] (--) evdev: Dell Dell USB Keyboard Hub: Found absolute axes
[    15.025] (II) evdev: Dell Dell USB Keyboard Hub: Forcing absolute x/y axes to exist.
[    15.025] (--) evdev: Dell Dell USB Keyboard Hub: Found keys
[    15.025] (II) evdev: Dell Dell USB Keyboard Hub: Forcing relative x/y axes to exist.
[    15.025] (II) evdev: Dell Dell USB Keyboard Hub: Configuring as mouse
[    15.025] (II) evdev: Dell Dell USB Keyboard Hub: Configuring as keyboard
[    15.025] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.1/input/input4/event4"
[    15.025] (II) XINPUT: Adding extended input device "Dell Dell USB Keyboard Hub" (type: KEYBOARD, id 10)
[    15.025] (**) Option "xkb_rules" "evdev"
[    15.025] (**) Option "xkb_model" "pc105"
[    15.025] (**) Option "xkb_layout" "us"
[    15.026] (II) evdev: Dell Dell USB Keyboard Hub: initialized for absolute axes.
[    15.026] (**) Dell Dell USB Keyboard Hub: (accel) keeping acceleration scheme 1
[    15.026] (**) Dell Dell USB Keyboard Hub: (accel) acceleration profile 0
[    15.026] (**) Dell Dell USB Keyboard Hub: (accel) acceleration factor: 2.000
[    15.026] (**) Dell Dell USB Keyboard Hub: (accel) acceleration threshold: 4
[    15.027] (II) config/udev: Adding input device Dell Premium USB Optical Mouse (/dev/input/event2)
[    15.027] (**) Dell Premium USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    15.027] (II) Using input driver 'evdev' for 'Dell Premium USB Optical Mouse'
[    15.027] (**) Dell Premium USB Optical Mouse: always reports core events
[    15.027] (**) evdev: Dell Premium USB Optical Mouse: Device: "/dev/input/event2"
[    15.027] (--) evdev: Dell Premium USB Optical Mouse: Vendor 0x413c Product 0x3016
[    15.027] (--) evdev: Dell Premium USB Optical Mouse: Found 14 mouse buttons
[    15.027] (--) evdev: Dell Premium USB Optical Mouse: Found scroll wheel(s)
[    15.027] (--) evdev: Dell Premium USB Optical Mouse: Found relative axes
[    15.027] (--) evdev: Dell Premium USB Optical Mouse: Found x and y relative axes
[    15.027] (II) evdev: Dell Premium USB Optical Mouse: Configuring as mouse
[    15.027] (II) evdev: Dell Premium USB Optical Mouse: Adding scrollwheel support
[    15.027] (**) evdev: Dell Premium USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    15.027] (**) evdev: Dell Premium USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    15.027] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input2/event2"
[    15.027] (II) XINPUT: Adding extended input device "Dell Premium USB Optical Mouse" (type: MOUSE, id 11)
[    15.027] (II) evdev: Dell Premium USB Optical Mouse: initialized for relative axes.
[    15.028] (**) Dell Premium USB Optical Mouse: (accel) keeping acceleration scheme 1
[    15.028] (**) Dell Premium USB Optical Mouse: (accel) acceleration profile 0
[    15.028] (**) Dell Premium USB Optical Mouse: (accel) acceleration factor: 2.000
[    15.028] (**) Dell Premium USB Optical Mouse: (accel) acceleration threshold: 4
[    15.028] (II) config/udev: Adding input device Dell Premium USB Optical Mouse (/dev/input/mouse0)
[    15.028] (II) No input driver specified, ignoring this device.
[    15.028] (II) This device may have been added with another device file.
[    15.029] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event10)
[    15.029] (II) No input driver specified, ignoring this device.
[    15.029] (II) This device may have been added with another device file.
[    15.029] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event6)
[    15.029] (II) No input driver specified, ignoring this device.
[    15.029] (II) This device may have been added with another device file.
[    15.029] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event7)
[    15.029] (II) No input driver specified, ignoring this device.
[    15.029] (II) This device may have been added with another device file.
[    15.030] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event8)
[    15.030] (II) No input driver specified, ignoring this device.
[    15.030] (II) This device may have been added with another device file.
[    15.030] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event9)
[    15.030] (II) No input driver specified, ignoring this device.
[    15.030] (II) This device may have been added with another device file.
[    15.031] (II) config/udev: Adding input device Webcam C170 (/dev/input/event11)
[    15.031] (**) Webcam C170: Applying InputClass "evdev keyboard catchall"
[    15.031] (II) Using input driver 'evdev' for 'Webcam C170'
[    15.031] (**) Webcam C170: always reports core events
[    15.031] (**) evdev: Webcam C170: Device: "/dev/input/event11"
[    15.031] (--) evdev: Webcam C170: Vendor 0x46d Product 0x82b
[    15.031] (--) evdev: Webcam C170: Found keys
[    15.031] (II) evdev: Webcam C170: Configuring as keyboard
[    15.031] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input11/event11"
[    15.031] (II) XINPUT: Adding extended input device "Webcam C170" (type: KEYBOARD, id 12)
[    15.031] (**) Option "xkb_rules" "evdev"
[    15.031] (**) Option "xkb_model" "pc105"
[    15.031] (**) Option "xkb_layout" "us"
[    15.034] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event12)
[    15.034] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    15.034] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[    15.035] (**) HP WMI hotkeys: always reports core events
[    15.035] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event12"
[    15.035] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[    15.035] (--) evdev: HP WMI hotkeys: Found keys
[    15.035] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[    15.035] (**) Option "config_info" "udev:/sys/devices/virtual/input/input12/event12"
[    15.035] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13)
[    15.035] (**) Option "xkb_rules" "evdev"
[    15.035] (**) Option "xkb_model" "pc105"
[    15.035] (**) Option "xkb_layout" "us"
[    25.280] (II) XKB: reuse xkmfile /var/lib/xkb/server-7601862AD4CF2943FB5EFC74A7B89B6A2E51111A.xkm
pedja@hp:~$

offline
  • Srđan Tot
  • Am I evil? I am man, yes I am.
  • Pridružio: 12 Jul 2005
  • Poruke: 2483
  • Gde živiš: Ljubljana

Ok... probaj da napraviš datoteku /etc/X11/xorg.conf.d/10-dell.conf i u nju upiši sledeće:
Section "Monitor"
   Identifier "Dell Monitor"
   VendorName "Dell"
   ModelName "Dell E173FP"
   HorizSync 31.5-64.0
   VertRefresh 56.0-65.0
EndSection

Section "Screen"
   Identifier "Default Screen"
   Monitor "Dell Monitor"
EndSection


Udri reset i drži palčeve Smile

offline
  • Pridružio: 10 Jun 2009
  • Poruke: 1203

@ Srki_82

Kreirao sam folder "xorg.conf.d" i u njemu fajl "10-dell.conf" sa podesavanjima koja si naveo - to si htio da uradim? Poslije toga sam restartovao racunar ali nista se ne desava. U podesavanjima displeja moj monitor uopste nije detektovan, samo pise "nepozat".

offline
  • Srđan Tot
  • Am I evil? I am man, yes I am.
  • Pridružio: 12 Jul 2005
  • Poruke: 2483
  • Gde živiš: Ljubljana

Zanima me samo da li X server pročita tu konfiguraciju... sad kad imaš tu novu datoteku, daj još jednom:
cat /var/log/Xorg.0.log

Ko je trenutno na forumu
 

Ukupno su 983 korisnika na forumu :: 20 registrovanih, 9 sakrivenih i 954 gosta   ::   [ Administrator ] [ Supermoderator ] [ Moderator ] :: Detaljnije

Najviše korisnika na forumu ikad bilo je 3466 - dana 01 Jun 2021 17:07

Korisnici koji su trenutno na forumu:
Korisnici trenutno na forumu: bojan_t, Boris90, DeerHunter, Denaya, Dogma21, hyla, Kubovac, Mali Rambo, Mercury, Mi lao shu, Milometer, nenad81, Panter, perkanidja1, perko91, Povratak1912, pristinski korpus, sasa87, t84dar, vathra