offline
- SlobaBgd
- Mod u pemziji
- Pridružio: 10 Okt 2005
- Poruke: 13526
- Gde živiš: Beograd
|
Nema šta da ti otvori, skini uputstvo (desni klik pa Save Link As...) i pročitaj ga. Ako nemaš program za čitanje PDF fajlova, instaliraj Foxit Reader ili Adobe Reader.
I ne biraš USB CD, pobogu, ne priključuješ USB CD nego flešku, dakle biraj USB flash drive.
Citat:5 Setup Utility
Starting Setup Utility
Setup Utility is a ROM-based information and customization utility that can be used even when your
Windows operating system is not working.
The utility reports information about the computer and provides settings for startup, security, and otherpreferences.
To start Setup Utility:
Open Setup Utility by turning on or restarting the computer, and then pressing f10 while the “F10 = BIOS Setup Options” message is displayed in the lower-left corner of the screen.
Using Setup Utility
Changing the language of Setup Utility
The following procedure explains how to change the language of Setup Utility. If Setup Utility is not
already running, begin at step 1. If Setup Utility is already running, begin at step 2.
1. Open Setup Utility by turning on or restarting the computer, and then pressing f10 while the “F10 = BIOS Setup Options” message is displayed in the lower-left corner of the screen.
2. Use the arrow keys to select System Configuration > Language, and then press enter.
3. Use the arrow keys to select a language, and then press enter.
4. When a confirmation prompt with your language selected is displayed, press enter.
5. To save your change and exit Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press enter. Your change goes into effect immediately.
Your change goes into effect immediately.
Navigating and selecting in Setup Utility
Because Setup Utility is not Windows based, it does not support the TouchPad. Navigation and
selection are by keystroke.
To choose a menu or a menu item, use the arrow keys.
To choose an item in a list or to toggle a field, for example an Enable/Disable field, use either the
arrow keys or f5 or f6.
To select an item, press enter.
To close a text box or return to the menu display, press esc.
To display additional navigation and selection information while Setup Utility is open, press f1.
Displaying system information
The following procedure explains how to display system information in Setup Utility. If Setup Utility is
not open, begin at step 1. If Setup Utility is open, begin at step 2.
1. Open Setup Utility by turning on or restarting the computer, and then pressing f10 while the “F10 = BIOS Setup Options” message is displayed in the lower-left corner of the screen.
2. Select the Main menu. System information such as the system time and date, and identification
information about the computer is displayed.
3. To exit Setup Utility without changing any settings, use the arrow keys to select Exit > Exit
Discarding Changes, and then press enter.
Restoring default settings in Setup Utility
The following procedure explains how to restore the Setup Utility default settings. If Setup Utility is not already running, begin at step 1. If Setup Utility is already running, begin at step 2.
1. Open Setup Utility by turning on or restarting the computer, and then pressing f10 while the “F10 = BIOS Setup Options” message is displayed in the lower-left corner of the screen.
2. Use the arrow keys to select Exit > Load Setup Defaults, and then press enter.
3. When the Setup Confirmation is displayed, press enter.
4. To save your change and exit Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press enter.
The Setup Utility default settings go into effect when the computer restarts.
NOTE: Your password, security, and language settings are not changed when you restore the factory
default settings.
Exiting Setup Utility
You can exit Setup Utility with or without saving changes.
To exit Setup Utility and save your changes from the current session:
If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the
arrow keys to select Exit > Exit Saving Changes, and then press enter.
To exit Setup Utility without saving your changes from the current session:
If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the
arrow keys to select Exit > Exit Discarding Changes, and then press enter. After either
choice, the computer restarts in Windows.
Setup Utility Menus
Main Menu
The menu tables in this section provide an overview of the Setup Utility options
NOTE: Some of the Setup Utility menu items listed in this chapter may not be supported by your
computer.
Select To do this
System information View and change the system time and date.
View identification information about the computer.
View specification information about the processor,
memory size, and system BIOS.
Security Menu
Select To do this
Administrator password Enter, change, or delete an administrator password.
Power-On password Enter, change, or delete a power-on password.
System Configuration Menu
Select To do this
Language Support Change the Setup Utility language.
Processor C4 State Enable/disable the processor C4 standby state.
Boot Options Set the following boot options:
f10 and f12 Delay (sec.)--Set the delay for the f10 and f12 functions of Setup Utility in intervals of 5 seconds each (0, 5, 10, 15, 20).
HP QuickWeb--Enable/disable the QuickWeb Boot menu in Setup Utility.
Internal Network Adapter boot--Enable/disable boot from Internal Network Adapter.
Boot Device Priority--Set the boot device priority for:
Internal hard drive (select models only)
USB Floppy
USB CD/DVD ROM Drive
USB flash drive
USB Hard drive
USB Card Reader
Network adapter
NOTE: Only the devices attached to the system will appear in the boot order menu.
Diagnostics Menu
Select To do this
Hard Disk Self Test (select models only) Run a comprehensive self-test on the hard drive.
Memory Test Run a diagnostic test on the system memory.
|
