fedoracore6/xp problem

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

evo ovako nisam bas prilicno iskusan al evo naime pokusavam povezat ova dva racunala u lokalnoj mrez i iz fedore vidim sve particije na xp,a sa xp-a ninako na fedoru .firevol sam iskljucio,ip adresa u fedori mi je 192.168.0.10,a getwe 192.168.0.5 subnet mask 255.255.255.0

na xp 192.168.0.5
255.255.255.0
get.192.168.0.10

molim za pomoc,naime htio bih da sa xp-a mogu pristupiti ftp-om i telnetom na fedoru

na fedori rade mi telnet i ftp prema vani izgleda da je u pitanju otvaranje portova ali neznam kako i gdje,mislim koju skriptu treba prepraviti

Dopuna: 19 Sep 2007 20:57

PING 192.168.0.10 (192.168.0.10): 64 data bytes
72 bytes from 192.168.0.10: icmp_seq=0 ttl=64 time=0.0 ms
72 bytes from 192.168.0.10: icmp_seq=1 ttl=64 time=0.0 ms
72 bytes from 192.168.0.10: icmp_seq=2 ttl=64 time=0.0 ms
--- 192.168.0.10 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 0.0/0.0/0.0 ms

ping mi je ok al nikako da se spojim

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

sta koristis da bi sa fedore pristupio xp-u i sta koristi na xp-u da bi pristupio fedori?
Ukoliko mislis da je do firewall-a probaj sa xp-a nmapom da skeniras fedoru.

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

u fedori conect to server upisem ip od xp-a i conect i odmah se spoji,radi mi telnet i ftp,a sa xp-a sam pokusavao sve i svasta pyti,ssh,telnet,tc-om,remote deskop,work group i nece il ja neznam il stvarno nisam pametan,

kako mislis nmapom to do sada nisam radio moze li malo poblize

Dopuna: 19 Sep 2007 22:11

sad cu ga potrazit na netu pa cu javiti

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

Nmap: http://insecure.org/nmap/

Da li ti je pokrenut samba server (ps -A | grep -i smbd)? Kako izgleda /etc/smb.conf? Kako ti se zove radna grupa (workgroup) na XPu?

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

Probaj WinSCP on koristi ssh da radi a izgleda kao obican ftp klient.
Ako nmap-om mozes da vidis port 22 (ako je open) na fedori onda ce ti raditi WinSCP. Mozes to da probas i PuTTY-jem. Da li mozes da se sopjis na fedoru PuTTY-jem?

Bez sambe se ne mozes povezati na fedoru sa windows explorerom ako kucas \\192.168.0.10

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

Uloguj se preko Facebooka da bi skinuo fajl:

bocke ::Nmap: insecure.org/nmap/

Da li ti je pokrenut samba server (ps -A | grep -i smbd)? Kako izgleda /etc/smb.conf? Kako ti se zove radna grupa (workgroup) na XPu?


etv/samba/smb. config

radna grupa toni
mycity.rs/must-login.png

Dopuna: 19 Sep 2007 23:23

u terminalu kad ukucam

[marko@localhost ~]$ ps -A | grep -i smbd
[marko@localhost ~]$

Dopuna: 19 Sep 2007 23:28

Starting Nmap 4.22SOC6 ( insecure.org ) at 2007-09-19 23:26 Central European Standard Time
Initiating ARP Ping Scan at 23:26
Scanning 192.168.0.10 [1 port]
Completed ARP Ping Scan at 23:26, 0.16s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 23:26
Completed Parallel DNS resolution of 1 host. at 23:26, 0.53s elapsed
Initiating SYN Stealth Scan at 23:26
Scanning 192.168.0.10 [1705 ports]
Discovered open port 5900/tcp on 192.168.0.10
Discovered open port 111/tcp on 192.168.0.10
Discovered open port 800/tcp on 192.168.0.10
Completed SYN Stealth Scan at 23:26, 1.17s elapsed (1705 total ports)
Initiating Service scan at 23:26
Scanning 3 services on 192.168.0.10
Completed Service scan at 23:26, 11.06s elapsed (3 services on 1 host)
Initiating OS detection (try #1) against 192.168.0.10
Initiating RPCGrind Scan against 192.168.0.10 at 23:26
Completed RPCGrind Scan against 192.168.0.10 at 23:26, 0.69s elapsed (2 ports)
SCRIPT ENGINE: Initiating script scanning.
Host 192.168.0.10 appears to be up ... good.
Interesting ports on 192.168.0.10:
Not shown: 1702 closed ports
PORT STATE SERVICE VERSION
111/tcp open rpcbind 2 (rpc #100000)
800/tcp open status 1 (rpc #100024)
5900/tcp open vnc VNC (protocol 3.7)
MAC Address: 00:11:D8:97:0C:D7 (Asustek Computer)
Device type: general purpose
Running: Linux 2.6.X
OS details: Linux 2.6.17 - 2.6.18 (x86)
Uptime: 0.243 days (since Wed Sep 19 17:36:31 2007)
Network Distance: 1 hop
TCP Sequence Prediction: Difficulty=202 (Good luck!)
IPID Sequence Generation: All zeros

Read data files from: C:\Program Files\Nmap
OS and Service detection performed. Please report any incorrect results at insecure.org/nmap/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 16.641 seconds
Raw packets sent: 1728 (77.644KB) | Rcvd: 1720 (79.450KB)

Dopuna: 19 Sep 2007 23:40

po ovome samo su mi tri porta otvorena e sad kako da otvorim 21,23 tcp i 2499 npr, udp

Dopuna: 19 Sep 2007 23:44

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

Koliko ja vidim, tebi niti je startovana samba, niti je smb.cnf podesen.

Prvo ukljuci sambu u podesavanjima Fedore. Za Gnome: System > Administration > Server Settings > Services. Ili u Run dijalog (KDE meni->Run ili Gnome meni->Run) ukucaj: system-config-services. Zatim ukljuci smbd i stavi ga u runlevel 3 i 5.

Zatim pokreni omiljeni tekst editor (recimo gedit) kao root (Pokrenes iz Run menija gksu, gksudo, gnome-sudo, gnomesu, ili xsu - koji god je dostupan uz Fedoru). Napr: gksu gedit. U njemu otvoris /etc/smb.conf i editujes... Zatim napravi backup starog /etc/smb.conf u (recimo) smb.conf.old (mv /etc/smb.conf /etc/smb.conf.old). Zatim sacuvas donja podesavanja kao /etc/smb.conf.

[global]
    #podesavanje samba servera
    netbios name = fedora
    server string = Fedora Core 6
    workgroup = toni
    encrypt passwords = yes
    #Dajemo pristup samo racunarima iz lokalne mreze
    hosts allow = 192.168.0.
    log file = /var/log/samba/%m.log
    #Ogranici velicinu loga na 1mb
    max log size = 1000

[homes]
    browsable = no
    read only = no
    map archive = yes

[marko]
#Tvoj home dir stavljamo u shareove
    comment = %U home directory
    writable = yes
    valid users = marko
    path = %H

Probaj sa ovim pa javi kako je proslo. Da li imas i neki printer na racunaru sa Linuxom?

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

U kom smislu da otvorish potove "21,23 tcp i 2499 npr, udp "

Portovi 20 i 21 su za FTP (jedan je za kontrolni kanal a drugi za podatke) i to ce ti biti otvoreno ako imas podignut neki FTP server (npr. ProFTP)

Port 22 ce ti biti otvoren ako ukljucis OpenSSH server (ili neki drugi) onda ce ti raditi i WinSCP i PuTTY

Sto se tice 23-ke to je za telnet. Naravno ako ukljucis telnet server bice ti open, mada pored ssh-a nemas potrebu za tim.

Naravno predpostavka je da ti je firewall iskljucen na fedori.

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

sambu nemogu nikako pokrenuti,preko ssh-porta pristupam linux-u ocigledno je da su mi portovi zatvoreni,ali kako ih otvoriti,treba mi 21,23,i 2499,u firevolu je sve namjesteno,pokusa sam i sa i bez firevolla,i jos nesto u network menageru (system-config-services)uopste nemam sambe za pokrenit,dok se ona nalazi u etc/samba samo dva file config i host
pokusao sam novu istalirat ali ne ide nikako


evo i loga od nmapa




Starting Nmap 4.22SOC6 ( insecure.org ) at 2007-09-20 15:36 Central European Standard Time
Initiating ARP Ping Scan at 15:36
Scanning 192.168.0.10 [1 port]
Completed ARP Ping Scan at 15:36, 0.11s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 15:36
Completed Parallel DNS resolution of 1 host. at 15:36, 2.98s elapsed
Initiating SYN Stealth Scan at 15:36
Scanning 192.168.0.10 [1705 ports]
Discovered open port 22/tcp on 192.168.0.10
Completed SYN Stealth Scan at 15:36, 17.75s elapsed (1705 total ports)
Initiating Service scan at 15:36
Scanning 1 service on 192.168.0.10
Completed Service scan at 15:36, 0.03s elapsed (1 service on 1 host)
Initiating OS detection (try #1) against 192.168.0.10
Retrying OS detection (try #2) against 192.168.0.10
Insufficient responses for TCP sequencing (3), OS detection may be less accurate
Initiating gen1 OS Detection against 192.168.0.10 at 25.219s
For OSScan assuming port 22 is open, tcp/21 and udp/36343 are closed, and neither are firewalled
SCRIPT ENGINE: Initiating script scanning.
Initiating SCRIPT ENGINE at 15:36
Completed SCRIPT ENGINE at 15:36, 0.02s elapsed
Host 192.168.0.10 appears to be up ... good.
Interesting ports on 192.168.0.10:
Not shown: 1697 filtered ports
PORT STATE SERVICE VERSION
21/tcp closed ftp
22/tcp open ssh OpenSSH 4.3 (protocol 2.0)
23/tcp closed telnet
80/tcp closed http
139/tcp closed netbios-ssn
445/tcp closed microsoft-ds
513/tcp closed login
631/tcp closed ipp
MAC Address: 00:11:D8:97:0C:D7 (Asustek Computer)
Device type: general purpose
Running: Linux 2.4.X|2.6.X
OS details: Linux 2.4.18 - 2.4.27, Linux 2.4.21 (Suse, x86), Linux 2.4.22, Linux 2.4.6 - 2.4.26 or 2.6.9, Linux 2.6.10, Linux 2.6.5 - 2.6.11, Linux 2.6.7, Linux 2.6.8 (Debian)
Network Distance: 1 hop
TCP Sequence Prediction: Difficulty=2420761 (Good luck!)
IPID Sequence Generation: All zeros

Read data files from: C:\Program Files\Nmap
OS and Service detection performed. Please report any incorrect results at insecure.org/nmap/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 27.203 seconds
Raw packets sent: 3471 (156.966KB) | Rcvd: 79 (5198B)

Dopuna: 20 Sep 2007 18:19

skinio novu sambu i nstal nanovo ,sad je imam poslije cu javiti rezultate

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

Ocigledno je da jesu zatvoreni. Sada imas WinSCP i to ti je manje vishe dovoljno.
Koji firewall koristis?