SpeedFan

• 2Ovo se svidja korisnicima: mcrule, g[h]ost
  
  Registruj se da bi pohvalio/la poruku!

SpeedFan 4.39





SpeedFan allows you to have a deeper view of the status of your computer. Almost every computer includes support for hardware monitoring. Accessing digital temperature sensors is really useful. If you are trying to figure out why your pc hangs when under heavy load or after some hours of usage, SpeedFan might help you to find the real cause. Very often it is a poor power supply, or an improperly installed heatsink that lead to behaviours that we tend to associate with errors from the operating system, but that are not. SpeedFan automatically searches your computer for interesting chips: the hardware monitor chips. SpeedFan can expose voltages, fan speeds and temperatures. On rare occasions, the BIOS doesn't activate such features. SpeedFan tries to enable them as long as this is a safe thing to do. Not only the motherboard is searched, but also some video cards and almost every recent hard disk. SpeedFan can access status info from EIDE, SATA and even SCSI drives, showing, in a consistent way, internal data that can be used to diagnose current and future hard disk failures. This is known as S.M.A.R.T. (Self-Monitoring Analysis and Reporting Technology). At the lowest level, SpeedFan is a hardware monitor software that can access digital temperature sensors, but its main feature is that it can control fan speeds according to the temperatures inside your pc, thus reducing noise.



Download: http://www.almico.com/speedfan439.exe

• 2Ovo se svidja korisnicima: mcrule, g[h]ost
  
  Registruj se da bi pohvalio/la poruku!

SpeedFan 4.40

- improved identification of Winbond W83667HG
- W83667HG has its own support code now
- W83667HG PWM MODE settings now work properly and can be used to change fan speeds
- fixed a minor bug in temperature readings of EMCT03
- fully included data from TPWS002 Intel Document about Tjmax values
- added support for ADP3228 fan reading
- AdvSmart no longer links a drive if SMART data has bad checksums

Home page: http://www.almico.com/speedfan.php

Download: http://www.almico.com/speedfan440.exe

• 2Ovo se svidja korisnicima: mcrule, g[h]ost
  
  Registruj se da bi pohvalio/la poruku!

SpeedFan 4.41



- added full support for Intel 5 Series/3400 Series SMBus
- added full support for Intel QST 2.x
- added full support for fan control for Intel QST
- added full support for Fintek F71889F
- added full support for Fintek F71889ED
- added full support for SB8x0 SMBus
- added full support for Nuvoton W83677HG-I
- added full support for Nuvoton W83667HG-B
- added SB7xx/8xx PM2 fan speed readings and fan control
- added full support for MCP98242
- added full support for CAT34TS02
- added support for ITE IT8721F
- added support for USB hard disk enclosures with Cypress chipset
- added W83791D advanced settings for PWM MODEs
- improved ADT7490 PWM MODE advanced settings
- added ADVANCED options for Fintek F75387 PWM MODEs
- fixed Fintek F75387F PWM setting
- enabled SMBus on Intel ICH9-M, if needed
- added detection of LIS331DL
- added Intel QST 2.x advanced option to revert back to AUTO fan control
- upon resume from suspend only those fans that are automatically variated are initially set to 100%
- identified more CPUs
- Intel Atom Series 300 Tjmax set to 90C
- HECI support works only on Windows 2000 and later
- AMCC/3ware support works only on Windows 2000 and later
- added more names for SMART attributes
- added a new option to CONFIGURE / OPTIONS to disable SMART Summary Error Log on program start (this can dramatically improve SpeedFan startup time)
- the UI is now updated whenever new SMART data is read from the selected hard disk
- now, in CONFIGURE / EVENTS, when you press UPDATE to change some event, the editing fields are automatically cleared and the OK button is automatically enabled
- restored access to SMART attributes on AdvSmart, Areca and AMCC/3ware connected drives in Event configuration window
- events can now react to FITNESS and PERFORMANCE values of SMART hard disks
- added NOADVSMARTSCAN command line switch
- the first line of the email sent by an EVENT now has been changed to include the Machine Name




Download:http://www.almico.com/speedfan.php

• 2Ovo se svidja korisnicima: mcrule, g[h]ost
  
  Registruj se da bi pohvalio/la poruku!

Napisano: 03 Nov 2010 15:27

SpeedFan 4.42



- greatly improved nVidia video card support
- added full access to hardware monitor chips available on several nVidia video cards (enabled I2C writes to allow fan speed control too)
- improved Intel QST support
- Intel QST now checks first for 2.0, then falls back to 1.0, if needed
- added support for external USB drives using JMicron controllers
- fixed fan speed computation for several Analog Devices chips (ADM1027, ADT7463, ADT7475, ADT7476, ADT7468, ADT7473, ADT7490) when configured for non standard number of pulses per revolution
- MUTEXes used to synchronize with other tools while accessing buses are now defined Global
- fixed CPU usage bars size on the main window
- enabled SMBus access on ICH10 and ICH10R, if needed
- if SpeedFan service is unavailable, a message dialog is shown and the program stops running
- added scan exceptions for Asus P5N-T DELUXE and Intel DX58SO
- SEND REPORT now includes a list of ACPI devices found


Dopuna: 17 Mar 2011 16:17

SpeedFan 4.43



- restored full nVidia video card support
- hard disk finding now uses more stringent rules that lead to a much faster program startup
- fixed configuration issues with multiple nVidia video cards on the same system
- greatly improved User Interface responsiveness
- administrator privileges are now required and enforced to run SpeedFan
- added full support for Nuvoton W83627DHG-P, including PWM control
- added full support for Nuvoton NCT6776F, including PWM control
- added full support for Fintek F71808E, including PWM control
- added full support for Fintek F71809, including PWM control
- added full support for ITE IT8728F, including PWM control
- added full support for EMC2113, including PWM control
- added full support for Nuvoton W83L771
- added full PWM control for ITE IT8721F
- added support for several JEDEC JC 42.4 compliant sensors
- fully verified ITE IT8721F fan reading and control
- improved support for ACPI Thermal Zone temperatures reporting
- fixed Nuvoton W83667HG PWM MODE advanced settings
- fixed Nuvoton W83667HG-B PWM MODE advanced settings
- fixed Nuvoton W83677HG-I PWM reading
- fixed Winbond W83791D and Winbond W83792D TEMP2 and TEMP3 readings
- fixed Nuvoton W83627DHG, W83627EHF and W83667HG PWM TYPE settings
- fixed ITE IT8728F H/M identification
- fixed ITE IT8728F advanced properties support
- fixed ITE IT8720F PWM control
- fixed PWM readings for fans 4 and 5 on some ITE IT8712F
- added support for 3 additional temperature readings for Nuvoton W83677HG-I
- added support for Vtt voltage reading on ADT7490
- added Fintek F71858 support for fans, PWMs and advanced options
- improved detection of AD7417 to avoid false identifications
- Intel Core temperature are now properly read for 2nd Generation Intel Core Processor Family (Sandy Bridge)
- TIntelCoreSensor avoids reading temperatures from threads resulting from Hyper-Threading
- fixed temperature reporting on some hard disks that do not expose the usual SMART attribute
- added identification of Fintek F71869F
- added preliminary identification of ITE IT8772F
- added preliminary detection of Asus A8000B
- fixed a bug that prevented access to the SMBus on some ATI southbridges
- voltage scans are no longer automatically enabled for several ITE chips
- added preliminary identification for Fintek F71859
- added identification of Fintek F71809 and Fintek F71859
- added full support for Intel 6 Series SMBus
- added Intel NM10 SMBus enabler
- added full support for Intel ICH10 82801JD/DO SMBus
- /NONVIDIAI2C command line parameter is properly honoured again
- fixed a nasty bug in Intel SMBus support routines that could lead to releasing SMBus ownership at the wrong time
- improved Intel SMBus routines
- added exact voltage readings for Intel DH61BE, DH61CR, DH61DL, DH61WW, DH67BL, DH67CL, DH67GD, DH67CF, DP67BA, DP67DE, DP67BG, DB65AL, DQ67EP, DQ67OW, DQ67SW, DX58OG
- improved voltage readings for Asus P8P67 DeLuxe, P8P67 and P8P67-M
- pre-built configuration support has been added
- pressing on the left of the tabs on the main form no longer closes the program


Dopuna: 13 Jul 2011 14:12

SpeedFan 4.44



- added full support for ATK0110
- added Advanced Fan Control including a graphical UI for configuration
- DELL support is now working on 64 bit systems too
- DELL support can change fan speeds, but if the BIOS is overriding it, there is little SpeedFan can do
- added support for ST STTS3000 and ST STTS2002 DIMM temperature sensors
- reported temperatures and fan speed on Sony Vaio VGN-FW21E
- fan speed is reported on some ASUS laptops with ATK0100 (like the F81Se and the K52JT)
- added preliminary identification of Fintek F71862
- PWM values can now be logged too
- temperatures are no longer tied to every fan speed as a default
- added F71809 PWM setting and reading
- improved SMART hard disk temperature reading if multiple attributes seem to report it
- rebuilt ARECA DLL with latest library and improved Areca RAID support
- more aggressive behaviour setting PWMs (this might help on systems where something else tries to change them)


Dopuna: 03 Nov 2011 18:38

SpeedFan 4.45



- added full support for ATI RADEON video cards (including CrossFire configurations and fan control)
- completely rewritten DELL support
- DELL support is now enabled on a wider range of models
- added full support for ITE IT8772F
- added support for Fintek F71889A
- added full support for SMSC EMC2103-1 and SMSC EMC2103-2
- added support for Fintek F71869AD
- added support for Fintek F71862 at unusual addresses
- preliminary support for SMSC SCH5317
- fixed Nuvoton W83627DHG-P PWM MODE advanced settings
- fixed ASUS ATK0110 readings on several motherboards
- fixed ATK0110 support on some Asus motherboards
- enabled SMBus on Intel ICH9M-E, if needed
- added full AMD Hudson-2 SMBus support
- TACPISonySensor support is now probed on all SONYs
- fixed multiple glitches and bug related to Advanced Fan Control UI
- in Advanced Fan Control dialog, control points can be fine tuned (+1,-1,+10,-10) using the right mouse button
- SMART Fitness synthetic value now is more stringent with some specific issues, reporting 0% in some cases that require immediate attention


Dopuna: 27 Mar 2012 13:03

SpeedFan 4.46



- greatly improved DELL support
 - nVidia I2C support works again with driver 275+
 - now ATI Radeon support resets Manual Fan Control to the state it had when SpeedFan was started (no more unexpected video card fan set to 100% on program exit)
 - added support for Intel X79 (Patsburg) SMBus
 - added support for ServerWorks HT1000 SMBus
 - added SAT support for USB enclosures
 - added support for USB enclosures using SunPlus, IoData and Logitech chipsets
 - added voltage reading tweaks and configurations for several Intel motherboards
 - added full support for Fintek F71858AD
 - rewritten Areca RAID support and improved support for Areca SAS controllers
 - slightly refactored hard disk USB vendor guessing
 - added support for AMD Family 12h (LLano) temperature
 - added support for AMD Family 14h (Bobcat) temperature
 - ATK0110 tries to find the best interface when multiple ones are available in ACPI BIOS (please, report if support is broken for your motherboard model)
 - added preliminary support for Fujitsu-Siemens Hades

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

Rogi ::SpeedFan 4.39






Na ovoj slici su pored komponenti stavljeni znakci kao stiklirano.
Ja na kompu imam ovaj program i pored nekih stvari mi stoji kao neka vatra, da li to znaci da je to komponenta pregrejana?

• 2Ovo se svidja korisnicima: mcrule, g[h]ost
  
  Registruj se da bi pohvalio/la poruku!

Ne mora uvek da znaci.
SpeedFan prikazuje temperature komponenti, ali ne i kolike bi one trebale da budu. To je nesto sto se podesava manuelno, zarad kontrole obrtaja ventilatora.
Normalna temperatura neke komponente moze biti 51 stepen, ali ako je warning podesen na 50, prikazivace plamen.

• 2Ovo se svidja korisnicima: mcrule, g[h]ost
  
  Registruj se da bi pohvalio/la poruku!

SpeedFan 4.47



-added support for hard disks through CSMI (Intel Matrix RAID and Intel Rapid Storage, for example)
-added support for Intel 7 Series SMBus
-added full support for NCT6779D
-added full support for Fintek F71808A
-fixed temperature reading for Intel Ivy Bridge
-fixed ATK0110 support on several motherboards
-switched to the new HddStatus service (it works on Unix/Linux too now)
-ARECA RAID support is not longer probed on Windows 2K
-limited DELL Studio 1558 support to the PWM alone for system stability
-added support for Seagate FreeAgentDesktop and FreeAgent USB enclosures
-added /NOINTELQST command line parameter
-TDELLSensor now handles resume from suspend

• 2Ovo se svidja korisnicima: mcrule, g[h]ost
  
  Registruj se da bi pohvalio/la poruku!

SpeedFan 4.49

Novosti & Ispravke:

- Fixed a typo that caused ACPI temperatures to be reported wrongly on some Windows 7
- Changed the name of the installer to improve compatibility with Windows 8

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

SpeedFan 4.50



- Added full support for Nuvoton NCT6791D (including fan control)
- Improved external (USB) hard disk detection (some were not properly detected on Windows 8)
- Added a new method to access hard disks connected to 3ware RAID controllers (works on 64 bit systems too)
- Added support for Intel core temperature (Family 06h Model 3Ch)
- Added support for Intel core temperature (Family 06h Model 3Eh)
- Added support for AMD Family 15h temperature
- Added support for AMD Family 16h temperature
- Added support for Intel 8 Series SMBus
- Added support for Intel 8 Series Mobile SMBus
- Added support for Intel 9 Series SMBus
- Added Nuvoton NCT6779D/NCT6791D advanced option to choose between PWM and DC output for System Fan (PWM 1)
- Changed the way NCT6779D and NCT6791D read fan speeds
- Added 4 more temperature readings to NCT6779D
- Added Fintek F71808A advanced setting: PWM TYPE 3
- Refined Fintek F71808A description for PWM MODEs
- Added preliminary support for ITE IT8620E temperatures and fan speeds
- Fixed a minor typo that caused Fintek F71808A to not show some temperatures properly.

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

SpeedFan 4.51