error 1305 i njemu slicni

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

na primer zbog ove greske ne mogu snimiti tu igru (slika), bilo je i slicnih gresaka tipa "ne moze se citati ili pisati u taj fajl ili tako nesto", cak mi je pukao jedan veci dowload. koliko sam na brzinu uspeo da nadjem po netu to su problemi od starijih win-ova, ja imam win xp sp3. ne znam kakve su prirode ove greske, hdd je wd75000aaks?

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

Na ovom forumu koliko ja znam mozemo ti pomoci samo ako imas Service Pack 2

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

mislis da je greska softverske prirode ?

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

sto posto,nego da li ti se to pojaavilo odjednom ili odmah kada si instalirao igricu,moze da bude puno problema koji su prouzrokovali gresku

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

ovaj komp imam jedno mesec dana (novi je), mislim da mi se u prvoj nedelji desilo nesto slicno ili mozda malo kasnije ali nisam obracao paznju, znaci sad ovu igru ne mogu snimiti (na d: nisam probavao) i jos jednom kod downloada se desilo

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

markomirtic ::Na ovom forumu koliko ja znam mozemo ti pomoci samo ako imas Service Pack 2

Od kad ovo

Skini drugi ISO..Pa vidi onda...Google bas i nije preterano rasplolozen sto se tice mogucih resenja..A jel ti puca download samo kad skidas taj image ili inace...?

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

Pazi,koliko sam ja tebe razumeo ti ne mozes da instaliras igricu,posto te nisam bas najbolje razumeo.

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

ne nisam skidao iso od te igre nego nesto drugo, ovaj cd od igre inace lepo radi na drugim mestima

ili ipak ne radi (stari komp win xp sp3)
ali opet mi je nesto cudno

Dopuna: 21 Jul 2008 19:06

markomirtic ::Pazi,koliko sam ja tebe razumeo ti ne mozes da instaliras igricu,posto te nisam bas najbolje razumeo.

ne mogu nju, ali usput sam jos pokupio par takvih errora (tipa ne moze read/write nad nekim fajlom sa kojim radi)

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

Citat:How To Fix This Error


Error Message:
Error 1305. Error reading from file: filename
Translation:
If you’re trying to install a Microsoft application from CD or DVD, you may receive this error message, where filename will be a specific file. There are a few possible causes of the error, including something as simple as the installation CD or DVD is flawed or damaged to something more complex, such as your CD/DVD drive isn’t configured correctly or you have an older or damaged version of MDAC (Microsoft Data Access Components) installed.
Solution:
You need to determine the specific cause first. Try the following in this order, stopping when you locate the issue:
• Check the CD/DVD for dirt or scratches. Clean it and try again. If it’s scratched badly, you might need another copy for installation.
• If it’s a DVD, are you trying to run it in a CD drive?
• Try the CD/DVD in another computer’s drive. If it works, the problem could be your drive. Try cleaning your drive with a cleaning disc.
• Quit all unnecessary software that’s running and try the installation. A program may be interfering with the installation.
• Run a system profile to determine the brand or model of your drive and search Microsoft Knowledge Base (http://support.microsoft.com) for known drive or CD/DVD-recording software issues.
• Check with your drive manufacturer to see if there are any firmware or driver updates for your drive. If so, install them and determine if this corrects the error.
• If you have an IDE/ATA (Integrated Drive Electronics/Advanced Technology Attachment) drive, disable DMA (Direct Memory Access). DMA is a high-performance mode of data transfer that bypasses the CPU. Disabling it may let the drive complete installation without the error. Go to Control Panel, select Performance And Maintenance, and click System. Select the Hardware tab and click Device Manager. Find IDE ATA/ATAPI Controllers and click the plus sign. (If you don’t see your drive listed, you have a SCSI drive, which has no DMA option.) Double-click Primary IDE Channel and select the Advanced Settings tab. Under Transfer Mode, select PIO Only and click OK. Restart your computer and try the installation again.
• Do you have multiple versions of your drive installed? If so, they could be conflicting with each other. Go to Control Panel and double-click System. Select the Hardware tab and click Device Manager. Find the DVD/CD-ROM drives and click the plus sign to see what devices are installed. Right-click each and select Properties. Write down the information you find in this window. Restart Windows in Safe Mode. Go into Device Manager and expand the DVD/CD-ROM drives. If there are multiple instances shown under your drive, remove all that don’t match the information you noted from the Properties Window by right-clicking and selecting Remove. Restart your computer and try the installation again.
• Try a clean boot of your computer. This will start your computer with only the basic devices and services and might let you successfully install the software. To do so, click Start and Run and type msconfig in the Open field. Click OK. Under the General tab, select Selective Startup and deselect Process SYSTEM.INI file, Process WIN.INI file, and Load Startup Items. Under the Services tab, check the Hide All Microsoft Services box and click Disable All. Now click OK and restart your machine. Try the installation again. If it doesn’t work, you can restore your normal settings by running Msconfig again and selecting Normal Startup under the General tab. Now restart. If this solves the problem and you can install, you’ll still want to restart with normal settings after the installation is complete.

If none of the above resolves the problem, try reinstalling Microsoft Data Access Components. In My Computer search for the file Mdac_typ.exe on your CD or DVD drive. When you find it, double-click to install. Finally, if your system is on a network and you have access to a shared CD/DVD drive, you can try connecting to the drive and installing the software from it.


http://www.smartcomputing.com/techsupport/detail.aspx?guid=&ErrorID=26082

• 0Niko još nije pohvalio poruku.
  Registruj se da bi pohvalio/la poruku!

ok, to je konkretno za 1305. kako vidim ili los disk ili ..., ali kako objasniti prekid downloada(mislim da nije 1305, tj sigurno nije bas taj)?

ps: hvala rogi